D-Link xStack DGS-3400 Series Cli Reference Manual page 353

xStack
delete mac_based_access_control guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the MAC-based Access Control guest VLAN called default:
DGS-3450:admin# delete mac_based_access_control guest_vlan default
Command: delete mac_based_access_control guest_vlan default
Success.
DGS-3450:admin#
clear mac_based_access_control auth_state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear MAC-based Access Control clients' authentication information for all ports:
DGS-3450:admin# clear mac_based_access_control auth_state ports all
Command: clear mac_based_access_control auth_state ports all
Success.
DGS-3450:admin#
To delete the MAC-based Access Control authentication information for the host that has a MAC address of 00-00-00-47-
04-65:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to remove a MAC-based Access Control guest VLAN.
delete mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid < vlanid
1-4094>]
Use this command to remove a MAC-based Access Control guest VLAN. When the guest
VLAN is removed, the guest VLAN function will be disabled.
guest_vlan - Specifies the name of the MAC-based Access Control's guest VLAN
guest_vlanid - Specifies the VID of the MAC-based Access Control's guest VLAN
Only Administrator and Operator-level users can issue this command.
Used to clear the clients' authentication information by specific port(s) or MAC address.
clear mac_based_access_control auth_state [ports [all | <portlist>] | mac_addr
<macaddr>]
This command is used to clear the authentication state of a user (or port). The port (or the
user) will return to an un-authenticated state. All the timers associated with the port (or the
user) will be reset.
ports - To specify the port range to delete MAC addresses on them.
<macaddr> - To delete a specified host with this MAC address.
Only Administrator and Operator-level users can issue this command.
349