xStack
DGS-3450:admin# show tech_support
Command: show tech_support
#-------------------------------------------------------------------------------
#
#
#
#
#
Copyright(C) 2010 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
********************
[SYS 2000-5-6 23:36:27]
Boot Time
RTC Time
Boot PROM Version
Firmware Version
Hardware Version
Serial number
MAC Address
[STACKING 2000-5-6 23:36:27]
CTRL+C ESC q
Quit
upload tech_support_toTFTP
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload the information of technique's support:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
DGS-3450 Gigabit Ethernet Switch
Technical Support Information
Firmware: Build 2.70.B56
Basic System Information
: 6 May 2000
23:29:19
: 2000/05/06 23:36:27
: Build 1.00-B13
: Build 2.70.B56
: A2
: H2FT29C000004
: 00-26-5A-87-41-15
SPACE n
Next Page
Used to upload the information of technique's support.
upload tech_support_toTFTP <ipaddr> <path_filename 64>
The upload tech_support_toTFTP command is used to upload the information of technique's
support to TFTP server. The information is project dependent and includes the following
information.
•
Basic System information
•
system log
•
Running configuration
•
Layer 1 information
•
Layer 2 information
•
Layer 3 information
•
Application
•
OS status
•
Controller's status
This command can be interrupted by Ctrl - C or ESC when it is executing.
ipaddr - Specifies the IP address of TFTP server.
path_filename - Specifies the file name to store the information of technique's support in
TFTP server. The max size of the file name is 64.
Only Administrator and Operator-level users can issue this command.
********************
ENTER
Next Entry
a
489
All