Command Syntax - D-Link xStack DGS-3400 Series Cli Reference Manual

xStack
The following symbols are used to describe how command entries are made and values and arguments are specified in
this manual. The online help contained in the CLI and available through the console interface uses the same syntax.
NOTE: All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted
function that changes text case.
<angle brackets>
Purpose
Syntax
Description
Example Command
[square brackets]
Purpose
Syntax
Description
Example Command
| vertical bar
Purpose
Syntax
Description
Example Command
{braces}
Purpose
Syntax
Description
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Encloses a variable or value that must be specified.
create ipif <ipif_name 12> <network_address> (<ip_addr/netmask>) <vlan_name 32>
{secondary | state [enable | disable]}
In the above syntax example, users must supply an IP interface name in the <ipif_name>
space, a VLAN name in the <vlan_name 32> space, and the network address, including the
netmask, in the <network_address> (<ip_addr/netmask>) space. Do not type the angle
brackets.
create ipif Engineering 10.24.22.5/255.0.0.0 Design
Encloses a required value or set of required arguments. One value or argument can be
specified.
create account [admin | operator | user] <username 15>
In the above syntax example, users must specify the admin, operator, or user level account to
be created. Do not type the square brackets.
create account admin ctsnow
Separates two or more mutually exclusive items in a list, one of which must be entered.
create account [admin | operator |user] <username 15>
In the above syntax example, you must specify the admin, operator, or user level account to
be created. Do not type the backslash.
create account admin ctsnow
Encloses an optional value or set of optional arguments.
reset {[config | system]}
In the above syntax example, users have the option to specify config or system. It is not
7
3
C S
OMMAND YNTAX