D-Link xStack DGS-3400 Series Cli Reference Manual page 501

xStack
DGS-3450:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DGS-3450:admin#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS-3450:admin# show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DGS-3450:admin#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DGS-3450:admin# enable sntp
Command: enable sntp
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the source IP address, time
and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 10.1.1.2
: 720 sec
To enable SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately configured (see config
sntp). Enabling and configuring SNTP support will override any manually configured system
time settings.
None.
Only Administrator and Operator-level users can issue this command. SNTP settings must
be configured for SNTP to function (config sntp).
497