D-Link xStack DGS-3400 Series Cli Reference Manual page 523

xStack
create route redistribute dst rip
Restrictions
Example usage:
To add route redistribution settings:
DGS-3450:admin# create route redistribute dst rip src local metric 2
Command: create route redistribute dst rip src local metric 2
Success.
DGS-3450:admin#
delete route redistribute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete route redistribution settings:
DGS-3450:admin# delete route redistribute dst rip src local
Command: delete route redistribute dst rip src local
Success.
DGS-3450:admin#
config route redistribute dst rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure route redistributions:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Only Administrator and Operator-level users can issue this command.
Used to delete route redistribute configuration on the switch.
delete route redistribute [dst rip src [static | local]]
This command is used to stop redistribution of routes from one source protocol to another
destination protocol.
dst - Specify the target protocol.
src - Specify the source protocol.
Only Administrator and Operator-level users can issue this command.
Used to update the metric to be associated with the redistributed routes from a specific
protocol to RIP protocol.
config route redistribute dst rip src [local | static] {metric <value 0-16>}
This command is used to update the metric to be associated with the redistributed routes
from a specific protocol to RIP protocol.
dst - Specify the target protocol.
src - Specify the source protocol.
static - To redistribute static routes to RIP.
local - To redistribute local routes to RIP.
metric - Specifies the RIP metric value for the redistributed routes. The valid value is 0 to 16.
Only Administrator and Operator-level users can issue this command.
519