D-Link xStack DGS-3400 Series Cli Reference Manual page 88

xStack
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the ARP table:
DGS-3450:admin# clear arptable
Command: clear arptable
Success.
DGS-3450:admin#
show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the ARP table:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to clear all the dynamic ARP entries from the ARP table.
clear arptable
This command is used to clear all the dynamic entries from ARP table.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the ARP table.
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr> }
This command is used to displays the ARP table. You can filter the display by IP address,
interface name, static entries or MAC address.
ipif_name - The name of the IP interface the end node or station for which the ARP table
entry was made, resides on.
ipaddr - The IP address of the end node or station.
static - Display the static entries in the ARP table.
macaddr - Displays the ARP entry by MAC address.
None.
84