D-Link xStack DGS-3400 Series Cli Reference Manual page 121

xStack
debug show error_reboot state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the error reboot status.
DGS-3450:admin# debug show error_reboot state
Command: debug show error_reboot state
Error Reboot: Enabled
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Use the command to show the error reboot status.
debug show error_reboot state
Show the error reboot status.
None.
Only Administrator and Operator-level users can issue this command.
117