D-Link xStack DGS-3400 Series Cli Reference Manual page 391

xStack
config account
Restrictions
Example usage:
To configure the user password of "dlink" account:
DGS-3450:admin# config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3450:admin#
To configure the user password of "dlink" account:
DGS-3450:admin# config account adminstrator
Command: config account administrator encrypt sha_1 *@&cRDtpNCeBiq15KOQsKVyrA0sAiCIZQwq
Success.
DGS-3450:admin#
show account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the accounts that have been created:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
sha_1 - Select to specify the password in the SHA-I enacrpted form.
<password> - The password for the user account. The length for of password in plain-text
form and in encrypted form are different. For the plain-text form, passwords must have a
minimum of 0 character and can have a maximum of 15 characters. For the encrypted form
password, the length is fixed to 35 bytes long. The assword is case-sensitive.
Only Administrator users can issue this command.
Used to display user accounts.
show account
The show account command displays user accounts that have been created.
None.
Only Administrator users can issue this command.
387