D-Link xStack DGS-3400 Series Cli Reference Manual page 313

xStack
clear jwac auth_state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete authentication entry:
DGS-3450:admin# clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS-3450:admin#
config jwac authorization attributes
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
The following example will disable the configuration authorized from the local database:
DGS-3450:admin# config jwac authorization attributes local disable
Command: config jwac authorization attributes local disable
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to clear the JWAC authentication entry.
clear jwac auth_state [ports [all | <portlist>] { authenticated | authenticating | blocked }
| mac_addr <macaddr>]
The user can use this command to clear the authentication entry.
ports - To specify the port range to delete host on them.
authenticated - To specify the state of host to delete.
authenticating - To specify the state of host to delete.
blocked - To specify the state of host to delete.
<macaddr> - To delete a specified host with this MAC.
Only Administrator and Operator-level users can issue this command.
The enable authorization command will enable acceptance of authorized configuration.
config jwac authorization attributes {radius [enable| disable] | local [enable | disable]}
(1)
Used to enable or disable acceptation of authorized configuration.
When the authorization is enabled for JWAC's RADIUS, the authorized data assigned by the
RADUIS server will be accepted if the global authorization network is enabled.
When the authorization is enabled for JWAC's local, the authorized data assigned by the
local database will be accepted.
radius - If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled. The default state is enabled.
local - If specified to enable, the authorized data assigned by the local database will be
accepted if the global authorization network is enabled. The default state is enabled.
Only Administrator and Operator-level users can issue this command.
309