D-Link xStack DGS-3400 Series Cli Reference Manual page 286

xStack
delete ipv6 neighbor_cache
Description
Parameters
Restrictions
Example usage:
To delete the neighbor cache.entry for IPv6 address 3ffc::1 on the IP interface "System":
DGS-3450:admin# delete ipv6 neighbor_cache ipif System 3ffc::1
Command: delete ipv6 neighbor_cache ipif System 3FFC::1
Success.
DGS-3450:admin#
show ipv6 neighbor_cache
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show all neighbor cache entries for the IP interface "System":
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
all]
Deletes a neighbor cache entry or static neighbor cache entries from the address cache or all
address cache entries on this IP interface. Both static and dynamic entries can be deleted.
ipif_name - The IPv6 interface name
ipv6addr - The neighbor's address.
all - All entries including static and dynamic entries will be deleted.
dynamic - Delete matching dynamic entries.
static - Delete matching static entries.
Only Administrator and Operator-level users can issue this command.
Shows the IPv6 neighbor cache.
show ipv6 neighbor_cache ipif [<ipif_name 12> | all] [ipv6address <ipv6addr> | static |
dynamic | all]
Displays the neighbor cache entry for the specified interface. You can display a specific
entry, all static entries, all dynamic entries, or all entries.
ipif_name - The IPv6 interface name
ipv6addr - The neighbor's address.
all - Displays all interfaces.
dynamic - Display all dynamic entries.
static - Display all static neighbor cache entries.
all - Displays all entries including static and dynamic entries.
Only Administrator and Operator-level users can issue this command.
282