D-Link xStack DGS-3400 Series Cli Reference Manual page 248

xStack
DGS-3450:admin# show igmp_snooping group
Command: show igmp_snooping group
Source/Group : 10.0.0.2
VLAN Name/VID : n172/172
Port Member : 1-2
Mode : INCLUDE
Source/Group : 10.0.0.2
VLAN Name/VID : n172/172
Port Member : 3
Mode : EXCLUDE
Source/Group : NULL
VLAN Name/VID : n172/172
Port Member : 4-5
Mode : EXCLUDE
Source/Group : NULL
VLAN Name/VID : n172/172
Port Member : 2:22
Mode : EXCLUDE
Total Entries : 4
DGS-3450:admin# show igmp_snooping group data_driven
Command: show igmp_snooping group data_driven
Source/Group
VLAN Name/VID
Port Member
Router Ports
Mode
Total Entries : 1
DGS-3450:admin#
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display router ports:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
/ 225.0.0.2
/ 225.0.0.3
/ 225.0.0.5
/ 239.255.255.250
: NULL/225.0.0.5
: default/1
:
: 24
: EXCLUDE
Used to display the currently configured router ports on the switch.
show router_ports {vlan <vlan_name 32>} {[static | dynamic | forbidden]}
This command displays the currently configured router ports on the switch.
vlan - Specify the name of the VLAN on which the router port resides.
static - Displays router ports that have been statically configured.
dynamic - Displays router ports that have been dynamically configured.
forbidden - Displays forbidden router ports that have been statically configured.
If no parameter is specified, the system will display all currently configured router ports on the
switch.
None.
244