D-Link xStack DGS-3400 Series Cli Reference Manual page 465

xStack
config box_id
Restrictions
Example usage:
To configure the Switch that has a current box ID of 1 to have an automatic ID assigned by the Switch:
DGS-3450:admin# config box_id current_box_id 1 new_box_id auto
Command: config box_id current_box_id 1 new_box_id auto
Success.
DGS-3450:admin#
show stack_information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the stack information:
DGS-3450:admin# show stack_information
Command: show stack_information
Topology :Duplex_Chain
My Box ID :3
Master ID :3
Box Count :1
Force Master Role: Enable
Box User
ID Set Type
--- ---- ---------- ----- ---- ------------------ ---------- --------- --------
1 - DGS-XXXXS
2 - NOT_EXIST
3 User DGS-3450
4 - NOT_EXIST
5 - NOT_EXIST
6 - NOT_EXIST
7 - NOT_EXIST
8 - NOT_EXIST
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
new_box_id - Specifies the new ID that will be assigned to the box. The parameter range is
1-12.
auto - Allows the box ID to be assigned automatically by the stack system. The new box ID
will take effect after the next reboot.
Only Administrator and Operator-level users can issue this command.
Used to display the stack information.
show stack_information
The show stack_information command displays stacking information.
None.
None.
Prio-
Exist rity
No
No
Exist 0 00-00-11-33-66-33
No
No
No
No
No
Prom
MAC Version
1.00.B007
461
Runtime H/W
Version Version
2.70.B56 A1