Changing The Inner Door; Changing The Outer Door Seal; Changing The Inner Door Seal - Asko TDC33 Service Manual

Changing the inner door

1. Remove the three screws that secure the lo-
wer hinge and twist it free, lift off the front
door.
2. Unscrew the handle.
3. Unscrew the 2 screws at the side of the front
door and the 3 at the lower edge.
4. Lift out the inner door with the filter holder.
5. Offer up the new inner door to the front door.
6. Secure the 2 screws at the sides of the front
door and the 3 at the lower edge.
7. Fit the handle.
8. Put the front door back on, keep it in posi-
tion with the aid of the door magnet, and se-
cure the hinge.

Changing the outer door seal

1. Open the front door.
2. Pull the seal out of its groove.
3. Fit a new seal.
NOTE
You can use soapy water to make installation ea-
sier.
IMPORTANT
Press the seal firmly down into its groove.

Changing the inner door seal

1. Open the front door.
2. Open the filter holder.
3. Peel the strip off the edge.
4. Install a new strip by easing it over all round
the edge.
3
3
2
3
SERVICE
2
3
55