Intercom Abandoned Call Display - NEC UX5000 Feature Handbook

To change the mode of an Intercom call you placed:
1. 1 .
If the call is ringing, this makes it voice-announce. If the call voice-announces, this makes it ring.
To make your incoming Intercom calls voice-announce:
1. CALL1 + 8 2 1 + SPK
To make your incoming Intercom calls ring:
CALL1 8 2 3 SPK
1. + +

Intercom Abandoned Call Display

You can display a list of the Intercom calls placed to you while you were away from your terminal.
To display the list of Intercom calls you did not answer:
1. CHECK + CALL2 .
Press CALL2 repeatedly until no more calls display.
2. CLEAR to return to the normal Time and Date display.
to hang up.
to hang up.
Intercom
Page - 75