Dial Number Preview; Call - NEC UX5000 Feature Handbook

Dial Number Preview

Dial Number Preview

Use Dial Number Preview to preview a number in your terminal's display before you dial it out. This helps
you avoid dialing errors. For example, if you review the previewed number and find an error, you can can-
cel the number and re-enter it correctly. Dial Number Preview is available for both outside and Intercom
calls.
To use Dial Number Preview to place a call:
1. Do not lift handset or press
2. Dial the number you want to preview.
If VRS is installed, you will need to press
3.

CALL1

to dial out the displayed number. If the displayed number is an outside number, it must contain
a line access code.
OR
HOLD
to cancel the number without dialing it out.
OR
LINE
to dial out the displayed outside number on the selected line.
If your previewed outside number has a trunk access code (e.g., 9), you can press
instead.
The UX5000 will not automatically strip out a trunk access code when you press a line key.
Page - 48
CALL1
.
*
then dial the number to be previewed.
CALL1