Voice Response System (Vrs) - NEC UX5000 Feature Handbook

Voice Response System (VRS)

Voice Response System (VRS)

This feature requires the IntraMail daughter board for Voice Response System (VRS) prompts.
You can record the Voice Response System (VRS) messages your UX5000 uses for Automated Attendant
greetings (page 13) and the General Message (page 64). If the UX5000 has incoming 900 service, you
can also record the message that plays to those callers before automatic billing occurs. You can record up
to 48 messages.
To record, listen to or erase a VRS Message:
1. CALL1 + 1 1 6 .
2. To record, dial 7 .
OR
To listen, dial 5 .
OR
To erase, dial 3 .
3. Dial the VRS message number (001-100) you want to record, listen to or erase.
If recording, begin when you hear the announcement, "Start recording at the tone and press the
# key when you are done."
When done, press # to end recording.
When listening to a message, press # to hear the message again.
If erasing, you can cancel erasing by pressing HOLD before hanging up.
4. SPK to hang up.
Page - 164