Intercom; To Place An Intercom Call - NEC UX5000 Feature Handbook

Intercom

Intercom
Call a co-worker over the Intercom. Normally, you are not restricted from placing an Intercom call to any
other extension. However, if your communications server is shared by several businesses, you may not be
able to call the other business's extensions. Check with your Communications Manager.

To place an Intercom call:

1. CALL1 + Extension number.
You can optionally dial 0 for your operator or *8 for your Voice Mailbox.
If the extension you call is busy or doesn't answer, you can (without hanging up):
- Dial another extension.
- Dial 8 to leave a message in your co-worker's mailbox.
For one-touch calling, see Hotline (page 72), Call Coverage (page 87) or One-Touch
Keys (page 96) instead.
To answer an Intercom call:
1. If you hear two beeps, speak toward the terminal.
Your terminal picks up your voice.
OR
If your terminal rings, lift handset.
Intercom calls you place may either ring or voice-announce at your co-worker's extension. What happens
depends on how your co-worker's extension is set up. You can, however, dial a code to change from one
method to the other.
The Intercom calls you receive can also either ring or voice-announce. You decide the best way to answer
your Intercom calls and then enable the option you want.
Page - 74