NEC UX5000 Feature Handbook page 159

From outside, to leave a message for a co-worker after calling your
company's Automated Attendant:
*
1. Press (for quick message).
2. Dial your co-worker's extension number.
To listen to your messages:
FUNCTION
1. (Voice Mail), push VMsg or
2. Push Lstn .
3. While listening to your message, you can do one of the following:
Push Reply to record a reply for the message sender.
Push Forwd to forward the message to a co-worker.
Push Call to make a return call to the message sender.
Push CID to hear the time and date the message was sent.
Dial SA (72) to save the message in your mailbox, or push Erase to erase the message.
Push Next to listen to the next message.
Push Rpt to repeat the message from the beginning.
Push Pause to pause and Resume to resume listening.
Push Exit to exit the message listen mode.
Push More> + List + New, Saved, or All to listen to new, saved, or all messages.
Push More> + Rew to back the message up a few seconds, or FFwd to go ahead a few seconds.
CALL1 * 8
+ .
Voice Mail
Page - 153