NEC UX5000 Feature Handbook page 34

Caller ID
4. Press the ABB Soft Key.
5. Press the ABBC or
6. Dial the Abbreviated Dial bin in which the number is to be stored.
If you press
If all Abbreviated Dial bins are used, the display shows "TABLE IS FULL".
7. HOLD .
8. Enter the name to be associated with the stored number.
For information on entering names, refer to the Name Storing feature.
Names can be up to 12 digits long.
HOLD
9. .
SPK
10. to hang up.
To store a Caller ID number in a Personal Abbreviated Dial bin:
Refer to Central Telephone Book (page 38) for details on storing a Caller ID number in the book.
You can store the Caller ID data in the UX5000's Abbreviated Dial Table or in one of your extension's Per-
sonal Abbreviated Dial bins. Each extension has 10 bins for personal storage.
1. With a keyset in an idle condition, press the
2. Press the CID Soft Key (Caller ID). The display shows:
Page - 28
ABBG Soft Key.
HOLD , the next available Abbreviated Dial bin will be used.
##: xxxxxxxxxxxxx
mm-dd hh:mm
Store DEL
LIST Soft Key.