Vga; Vga Command - Compaq AlphaServer GS60 Operation Manual

7.5.39 Vga

The vga command tests the graphics console monitor.
Example 7-39 Vga Command
P00>>> vga test 0
.
.
.
[displays character set on graphics monitor]
The vga command syntax is:
vga [reinit] [test <test_nbr> [<n>]]
where reinit reinitializes the graphics monitor, and test_nbr can have three values:
test_nbr = 0 Display the entire character set on the graphics monitor <n> times.
1 Display color bars on the graphics monitor. You can then adjust the
color values, if your monitor offers such adjustment.
2 Display the character E repeatedly on the screen. This allows you to
determine whether the alignment of the screen is as it should be. You
can then adjust the alignment, if your monitor offers such adjustment.
7-64 AlphaServer 8200/8400 Operations Manual