Type - Compaq AlphaServer GS60 Operation Manual

7.5.38 Type

The type command displays the contents of a specified file, one screen at a time.
One common use of type is to display the event log, as shown in Example 7-38.
Type a space to see the next screen, or Enter to see the next line.
Example 7-38 Type Command
P00>>> type el
01:14.63
01:14.63 Starting console on CPU 0
01:14.63 initialized idle PCB
01:14.63 initializing semaphores
01:14.63 initializing heap
01:14.63 initial heap 100000
01:14.63 Twilight zone at 7e000, length 82000(532480)
01:14.63 Heap size effc0(982976)
01:14.63 memory low limit = 1f0000
01:14.63 heap = 100000, effc0
01:14.63 initializing driver structures
01:14.63 initializing overlays
01:14.63 initializing idle process PID
01:14.63 initializing flash index
01:14.63 hf_init
01:14.63 hf_init_platform: console_dlb_flag = 0
01:14.63 hf_init_platform: from_adr = 13d694, index_count
150
01:14.63 hf_setup_platform
01:14.63 load XDELTA
01:14.63 Transferring to xdelta
01:14.63 initializing file system
01:14.63 DDB Startup, phase = 0
[--More-- (SPACE - next page, ENTER - next line)
SRM Console Commands 7-63