Compaq AlphaServer GS60 Operation Manual page 216

The run command has four options:
1. rcu - Run the RAID Configuration Utility
2. swxcrfw - Update firmware on RAID controller.
3. eeromcfg - Run the ISP1020/1040 EEROM Configuration Utility.
4. util_cli - Run the KZPSA Configuration Utility
Options 1 and 2 (rcu and swxcrfw) are on floppy and require a floppy drive. Options
3 and 4 (eeromcfg and util_cli) are on CD.
The run command syntax is:
run <program> [-d <device>][-p <n>][-s <parameter string>]
where <program> is the command option selected, <device> is the console device
containing the program (default is dva0), <n> is the unit number of the PCI to
configure, and <parameter string> are any optional parameters that must be passed to
the utility, which must be enclosed in quotes. The utility documentation specifies any
required parameters.
To use this command, the arc_enable environment variable must be set to on and the
system initialized. An example would be:
P08>>> run swxcrfw -p 1 n -s "swxcrfwp.215 -v 215"
7-40 AlphaServer 8200/8400 Operations Manual