Compaq AlphaServer GS60 Operation Manual page 188

Table 7-3 Environment Variables (Continued)
Variable
enable_audit
ew*0_loop_count
ew*0_loop_inc
ew*0_loop_patt
ew*0_loop_size
ew*0_lp_msg_node Nonvolatile
ew*0__mode
7-12 AlphaServer 8200/8400 Operations Manual
Attribute Function
Nonvolatile If set to on (default), enables the generation
of audit trail messages. If set to off, audit
trail messages are suppressed, Console
initialization sets this to on.
Nonvolatile Specifies the number of times each message
is looped for a test command exercising a
PCI network adapter.
Nonvolatile Specifies the amount the message size is
increased from message to message.
Nonvolatile Specifies the type of data pattern to be used
when doing loopback. Current patterns are
accessed by:
0xffffffff All the patterns
1
2
3
4
5
Nonvolatile Specifies the size of the loop data to be used.
Specifies the number of messages originally
sent to each node.
Nonvolatile Specifies the value for the Ethernet port node
when it is started. Allowed values are:
Auto-Sensing
AUI
Twisted-Pair
Full Duplex, Twisted Pair
BNC
FastFD (Full Duplex)
Auto-Negotiate
All zeroes
All ones
All A's
Incrementing
Decrementing