Compaq AlphaServer GS60 Operation Manual page 145

The NODE # line lists the node numbers on the TLSB and I/O buses.
The nodes on this line are numbered in hexadecimal. Note that TLSB entries use
nodes 0 through 8 (the 8400 TLSB has 9 slots). Nodes 4 through 8 are used for
the AlphaServer 8200. The TLSB slot numbers and node numbers are identical.
For the 8400, nodes 0 through 3 reflect the right-to-left position of the TLSB
slots as you view the TLSB from the front of the cabinet and nodes 4 through 8
reflect the right-to-left position of the TLSB slots as you view the TLSB from the
rear of the cabinet. For the 8200, nodes 4 through 8 reflect the right-to-left
position of the TLSB slots as you view the TLSB from the front of the cabinet.
Each XMI bus has 14 slots. The XMI slot and node numbers are identical. Node
numbers are 1 through E on the XMI.
Each PCI bus has 12 slots, numbered 0 through B.
Each EISA bus has 8 slots, numbered 1 through 8.
The TYP line in the printout indicates the type of module at each TLSB node:
•
An adapter: the KFTHA or KFTIA port module (A)
•
A memory module (M)
•
A processor (P) module
A period (.) indicates that the slot is not populated or that the module is not
reporting.
System Troubleshooting 6-23