Show <Envar - Compaq AlphaServer GS60 Operation Manual

7.5.30 Show <envar>
Show <envar> displays the current state of the specified environment variable.
Example 7-30 Show <envar> Command
1. P00>>> show auto_action
auto_action
P00>>>
2. P00>>> show tta0_baud
tta0_baud
3. P00>>> show d_harderr
d_harderr
4. P00>>> show enable*
enable_audit
5. P00>>> show interleave
interleave
The show envar command syntax is:
sh[ow] <envar> or sh[ow] *
where envar is an environment variable name (see Table 7-3). Unambiguous
abbreviations can be used for an environment variable name when using the show
<envar> command. See the set <envar> command for related information.
7-54 AlphaServer 8200/8400 Operations Manual
restart
9600
halt
OFF
none
# Displays status
# of enable_audit