7.5.18 Prcache
The prcache command manipulates an optional NVRAM disk cache.
Example 7-18 Prcache Command
P00>>> prcache -f
PCI NVRAM Disk Cache:
Size:
2MB
Base Address:
System ID:
21000035
State: valid
Battery Status:
Battery Disconnect Circuit Status: disabled
The prchache command syntax is:
prcache [-z] [-f] [-u] [nvram_bus]
where -z zeros the NVRAM disk cache
-f displays the NVRAM status
-u disables the NVRAM battery disconnect circuit
nvram_bus defines the action to be performed on the NVRAM card installed on
the bus.
passed
040000000
good
SRM Console Commands 7-37
Need help?
Do you have a question about the AlphaServer GS60 and is the answer not in the manual?