Compaq AlphaServer GS60 Operation Manual page 249

Switch from AlphaBIOS Setup to SRM Console
To return to the SRM console from AlphaBIOS Setup,
1. Press Ctrl/Alt/Delete.
2. If the auto_action environment variable is set to halt, the system will stop at the
SRM console prompt and you can enter commands. Otherwise, proceed to Step 3.
3. If the auto_action environment variable has been set to boot, press the Secure
pushbutton in (8200) or turn the keyswitch to Secure (8400) before AlphaBIOS
starts automatically.
4. When the display stops at the SRM console prompt, return the Secure pushbutton
to out (8200) or turn the keyswitch to Enable (8400). You can then enter SRM
console commands.
Switch from AlphaBIOS Setup to Windows NT
Press the Esc key, and AlphaBIOS returns to the boot screen. See Section 5.5 for the
effect of AlphaBIOS Setup options on how Windows NT is booted from this screen.
AlphaBIOS Firmware 8-7