Compaq AlphaServer GS60 Operation Manual page 183

Table 7–2 SRM Console Special Characters (Continued)
Character
Ctrl/Q
Ctrl/R
Ctrl/S
Ctrl/U
*
" "
#
Return terminates command line input. No action is taken on a command line until it
is terminated by a carriage return. If no characters are entered and the Return key is
pressed, it is treated as a null command. No action is taken, and the console prompts
for input. Carriage return is echoed as carriage return, line feed.
Backslash (\) allows continuation across lines from the terminal; must be the last
character on the line to be continued.
When the Delete key is pressed, the console deletes the character previously typed.
Help provides additional information on console commands.
Ctrl/A or F14 toggles between insertion mode and overstrike mode for command line
editing. The default mode is overstrike.
Ctrl/B or up-arrow/down-arrow recall the previous command(s). The last 16
commands are stored in the recall buffer.
Ctrl/C terminates the current command. Echoed as ^C, Ctrl/C clears Ctrl/S and also
resumes output that was suspended using Ctrl/O. When Ctrl/C is entered as part of a
command line, the line is deleted as if you entered Ctrl/U. Ctrl/C has no effect as part
of a binary data stream.
Ctrl/D or left-arrow moves the cursor one position to the left.
Ctrl/E moves the cursor to the end of the line.
Ctrl/F or right-arrow moves the cursor right one position.
Ctrl/H, Backspace, or F12 moves the cursor to the beginning of the line.
Ctrl/J deletes previously typed word.
Ctrl/O stops output to the console terminal until Ctrl/O is entered again. Ctrl/O is
echoed as ^O followed by a carriage return and is not echoed when output is reenabled.
Function
Resume output to console terminal.
Redisplay the current line.
Stop output to console terminal.
Delete entire line.
Wildcarding for certain commands.
Quotes for set environment variable name.
Comment specifier.
SRM Console Commands 7-7