Compaq AlphaServer GS60 Operation Manual page 211

Example 7-14 Help Command (Continued)
3. P02>>> help runecu
NAME
runecu
FUNCTION
Run the EISA Configuration Utility from floppy.
SYNOPSIS
runecu
P02>>> help run
NAME
run
FUNCTION
Run an ARC utility program.
SYNOPSIS
run <program> [-d <device>][-p <n>][-s <parameter string>]
where:
<device> is the console device containing the program.
Default is dva0.
<n> is the unit number of PCI to configure.(ie,0 for pci0)
<parameter string> Any optional parameters which must be
The help command syntax is:
he[lp] [<command>]
where <command> is one of the console commands. The <helpkey> can
also be used after a partial command has been typed. For example,
set <helpkey> will display the options supported by the set command.
passed to the utility, must be enclosed
in quotes.
SRM Console Commands 7-35