Updating Firmware
Polycom, Inc.
Click the Find Firmware Code button, in the Open dialog box locate the
2
runtime code (.bin file), and then click Open.
Click Load Flash to load the flash to the RAM of the KWS8000.
3
When the load has completed, click Burn Flash to write the flash to the
4
KWS8000. Note that the system goes offline and restarts after the burn,
which will affect all current users of the system. You can view the process
on the Trace tab.
If you experience problems when updating the firmware, see
Software Manually"
on page 78 for information on how to update the firmware
manually.
General System Settings
"Updating
21