Figure 3-7 Export Communications Configuration - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide
12
To Export Communication Configurations
From the Startup window, click the Change Communications
1
Configuration button. There is an automatic delay of 6 seconds that allows
you to click the button before the program starts. In the Communications
Configuration window, press the Edit button.
From the File menu in the window, click Export.
2
Figure 3-7 Export Communications Configuration
In the Open window navigate to where you want to the Communications
3
Configuration File (*.cc), and then click Save. The communication
configuration is saved.
To Change the Communications Configuration Settings
From the Startup window, click the Change Communications
1
Configuration button. There is an automatic delay of 6 seconds that allows
you to click the button before the program starts.
Click the Edit button. The Communications Configuration window
2
appears.
Right-click the connection you want to change, and then click Change. The
3
Change Connection window appears.
On the Null Modem Cable tab, you can change the following:
4
— the name of the connection
— the default COM port.
On the Modem tab, you can change the following
5
— the name of the connection
— the default COM port
— PBX Prefix for outbound calls
— Phone number
— Extension number
— Wait/Pause time
Downloading the OAM Program
Polycom, Inc.