Changing A Registration - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide

Changing a Registration

16
Alternatively, you can go to the Debug menu and set the trace level to
c
1, and then try to subscribe the handset. The subscription will fail, but
the handset IPEI will be displayed in the Trace window.
In the DN field, type the direct number of the handset. The number must
3
match the number of the attached PBX line. Typing a direct number makes
it possible to send an MSF to the handset.
In the Name field, type the name of the handset as it appears in the
4
database. This field is optional.
In the Standby Text field, type the text that is displayed when the handset
5
is on hook.
From the Line Type list, select whether the line is Analog or DECT to
6
DECT.
Note Only handsets that are developed and manufactured by Polycom
Denmark support KIRK messaging, and only these handset can be
used as DECT to DECT handsets. Other handsets including the
Polycom Kirk 2010 can not be used as DECT to DECT handset because
they do not support the Messaging protocol.
In the Connector list, enter the connector (A-D) to which the handset is
7
connected.
In the Pair list, enter the wire pair (1-4) to which the handset is connected.
8
Shelf Number list enter the shelf number to which the handset is
9
connected.
10 In the Card Number list, enter the card number to which the handset is
connected.
11 In the Access Code field, type the authentication code (AC). This field is
optional.
12 In the Presentation Text field type the text that is
optional.
13 Click Create to save the registration. You can then continue with new
registrations, or click Close to close the window.
To change a user registration, you follow the same procedure as described in
"To Register New Users"
registration, the GainTx and GainRx fields are also available. We recommend
that you only make changes to GainRx.
on page 15. However, when you are changing a
User Registration
send to caller. This field is
Polycom, Inc.