Figure 8-2 Specifying Trace Filters; Table 8-1 Trace Levels - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide
46
You have the following options.
Trace level
Disabled
Level 1
Level 2
Level 3
Level 4
To further limit the amount of information that is displayed, you can set a trace
filter.
To Specify a Trace Filter
From the Debug menu, click Trace filters.
1
Figure 8-2 Specifying Trace Filters
Table 8-1 Trace Levels
Description
Displays no trace messages.
Displays subscription and location
registration information.
Displays subscription, location
registration, abnormal calls, and
messaging information.
Displays subscription, location
registration, abnormal calls, messaging,
and normal voice information.
Note level 4 is intended for Polycom KIRK
internal use only. We recommend that you
don't use level 4 unless otherwise
instructed by Polycom.
Displays subscription, location
registration, abnormal calls, messaging,
and normal voice information as well as
debug messages.
Tracing
Polycom, Inc.