Table 7-1 Analogue Settings - Polycom KIRK 8000 Configuration Manual

Analogue Settings
Polycom, Inc.
For each slot in a shelf the following information is displayed.
Table 7-1 Analogue Settings
Parameter Details
Ringer Maximum frequency
Minimum frequency
Number of periods
Clip type
FSK Clip Time-out
Seizure (bits)
Mark (bits)
DTMF Tx Tone on time (ms)
Tone pause time (ms)
Level offset (dB)
Recall Loop
Break Time
Dial Tone Time
Detect
Time-out
Number of
Busy Tone
Period
ECAN State (On/Off)
System Management
Description
Lists the maximum ringer
frequency
Lists the minimum ringer
frequency
Specifies the number periods
Displays the caller ID
standard that is used.
Specifies how long the caller
ID is displayed on the
handset.
Specifies the number of
alternating bits used for
channel signaling.
Specifies the number of
alternating bits used for
synchronization.
Specifies the length of the
dial tone.
Specifies the length of the
pause between each dial
tone.
Specifies the level offset of
the dial tone.
The register recall time in
milliseconds. (R)
The time it takes before a dial
tone is accepted as valid.
Specifies the number of
seconds to wait for a dial tone
before sending digits
regardless of whether there's
a dial tone.
Specifies the number of
seconds to wait before
accepting busy signal.
Specifies whether echo
cancellation is enabled or
disabled.
35