Installing The Kws8000 Oam Program; Connecting The Kws8000 To A Computer; Figure 3-1 Serial Connection Null Modem Cable; Table 2-3 Analogue Interface Card Leds - Polycom KIRK 8000 Configuration Manual

Installing the KWS8000 OAM
Program

Connecting the KWS8000 to a Computer

Note
Polycom, Inc.
This chapter describes how to install and configure the communications
settings for the KWS8000.
Before you can use the OAM program, you need to connect the KWS8000 to a
computer using a null-modem cable.
The KWS8000 serial port is a 9-pin DSUB male connector for direct connection
between the computer and DMD.
The maximum length of the null-modem cable must not exceed five meters
(16 feet.)
Figure 3-1 Serial Connection Null Modem Cable
3
7