Polycom KIRK 8000 Configuration Manual page 55

Polycom KIRK Wireless Server 8000 Configuration Guide
50
stipulation is required by the FCC and applies during
and after the warranty period.
United States Safety Construction Details:
o All connections are indoor only.
o No direct connections to public networks.
o Unit is intended for RESTRICTED ACCESS
LOCATION.
o Unit is to be installed in accordance with the
National Electrical Code.
o The branch circuit overcurrent protection shall
be rated 20 A for the AC system.
o This equipment has a maximum operating
ambient of 40°C, the ambient temperature in
the rack shall not exceed this temperature
Polycom Inc., declares that the Polycom KWS 8000 is
in conformity with the following relevant harmonized
standards:
EN 60950-1:2006
EN 55022:2006
EN 55024:1998, A1:2002, A2:2003
Following the provisions of the Council Directive
1999/CE on radio and telecommunication terminal
equipment and the recognition of its conformity.
This KIRK product has been marked with
the CE mark. This mark indicates
compliance with EEC Directives 89/336/EEC,
73/23/EEC 1999/5/EC. A full copy of the
Declaration of Conformity can be obtained
from Polycom Ltd, 270 Bath Road, Slough,
Berkshire, SL1 4DX, UK.
The WEEE Marking on this equipment
indicates that the product must not be
disposed of with unsorted waste, but must
be collected separately.
International Regulatory and Product Information
CE Mark R&TTE Directive
Polycom, Inc.