Figure 4-2 Create Or Change User Dialog - Polycom KIRK 8000 Configuration Manual

User Registration
Polycom, Inc.
Property
Line Type
Connector
Pair
Card Number
Shelf Number
PP Part Number
PP PCS
Tx Gain
Rx Gain
To Register New Users
You can add new users from the Registration/Users tab
Click the Create new registration button. The Create of Change User
1
dialog appears.
Figure 4-2 Create or Change User dialog
In the IPEI field, type the IPEI number (serial number) of the handset. The
2
serial number consist of a five-digit handset type (manufacturer code) and
a seven-digit handset number.
On KIRK 40XX handsets, press *99984*, and then press the Mute key to
a
read the IPEI number. The IPEI number is the one displayed on the
second line. Alternatively, look at the label for the serial number.
On KIRK 50XX handsets press Menu, select Status and then select Firmware
b
version to display the IPEI number.
Table 4-1 Registration Information
Description
Specifies whether the line is analogue, or
DECT-to-DECT (for KIRK messaging
portables)
Specifies the connector from A-D.
Specifies the wire pair from 1-4.
Identifies the number of the card to which
the handset is registered. (1-8)
Identifies the shelf to which the handset is
connected.(1-8)
Part number that identifies the handset
software.
Product change status of the handset
software.
The transmitter gain in dB.
The receiver gain in dB.
Handset Registration and subscription
15