Radio Part Numbers - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide
38
Parameter
Time slot in air
RPN
Cable Delay
Shelf
Card No.
To Change Base Station Region
On the Base Station tab, right-click in any cell in the row that contains the
1
base station (RFP) whose region you want to change.
Point to Region, and then select the preferred region.
2
Europe
a
South America
b
Taiwan
c
USA
d
Important You should only change to a region with a frequency range that
is legal for use in your area.
Click the Write button, to write the changes to the system.
3
To Change Base Station Slot
On the Base Station tab, right-click in any cell in the row that contains the
1
base station (RFP) whose slot you want to change.
Point to Slot, and then select one of the following options.
2
Even
a
Odd
b
Follow RPN
c
Table 7-2 Base Station Settings
Description
There are 12 air time slots in each
direction (numbered 0-11). If set to "Even",
the base station uses an even time slot
(0,2,4,6,8,10). If set to "Odd" then the
base station will use an odd time slot
(1,3,5,7,9,11). If set to "Follow RPN", the
base station will use even time slots if it
has an even RPN; if it has an odd RPN
then the base station will use odd time
slots.
Radio Part Number. The number the base
station sends. (0-255) For more
information, see
page 39
The time it takes the signal to reach the
base station.
The number of the shelf to which the base
station is connected. (1-8)
Specifies the card number. (1-8)
Base Station Settings

"Radio Part Numbers"

on
Polycom, Inc.