Universal Raid Utility; Setup With Express Setup; Manual Setup - NEC Express5800 User Manual

Universal RAID Utility

Universal RAID Utility is an application to manage or monitor the following RAID Controllers.
LSI Embedded MegaRAID
N8103-109 RAID controller (128 MB, RAID0/1/5/6)
N8103-116A RAID controller (128 MB, RAID0/1)
N8103-117A RAID controller (128 MB, RAID0/1/5/6)
Before attempting to operate Universal RAID Utility, read the "Universal RAID Utility Ver2.0
User's Guide" contained in NEC EXPRESSBUILDER DVD. The manual explains the installation
procedure and notes on operating Universal RAID Utility.

Setup with Express Setup

You can install Universal RAID Utility with Express Setup contained in NEC EXPRESSBUILDER
DVD. When you start the Express Setup, a dialog to specify an application appears. Select
[Universal RAID Utility] on the dialog.

Manual Setup

Windows
You can start the setup program of Universal RAID Utility from [Autorun Menu].
Click [Setup Software] → [Universal RAID Utility] in [Autorun Menu].
You need to install the following software.
Microsoft .NET Framework 2.0
The Runtime component of the Microsoft Visual C++ 2005 SP1
You can install these software from [Autorun Menu] too.
Click [Setup Windows] → [Install the .NET Framework Ver 2.0 Redistributable Package (x86)] (If
CPU architecture is x64, [Install the .NET Framework Ver2.0 Redistributable Package (x64)]) in
[Autorun Menu] for the setup of Microsoft.NET Framework 2.0.
Click [Setup Windows] → [Install the Microsoft Visual C++ 2005 SP1 Redistributable
Package(x86)] (Use the x86 package whatever the CPU architecture may be.) for the setup of the
Runtime component of the Microsoft Visual C++ 2005 SP1.
Installing and Using Utilities 6-21