Troubleshooting - NEC Express5800 User Manual

Error
Error message
code
02D1 System Memory exceeds the CPU's caching limit.
02F4 EISA CMOS not write able
02F5 DMA Test Failed
02F6 Software NMI Failed
02F7 Fail-safe Timer NMI Failed
0615 COM B Configuration changed
0B5F Forced to use Processor with error
0BB2 POST memory Resize
8151 Password Cleared By Jumper
None Expansion ROM not initialized – PCI Mass
Storage Controller in slot xx (xx: slot number)
All Memories are No Good. Please replace
Memories and clear Memory ECC Error
Information by SETUP.

Troubleshooting 8-7

Recommended Action
Contact your service representative.
Start the SETUP and select [Advanced] -
[Peripheral Configuration] - [Serial Port
A] and [Serial Port B] to check if settings
are correct. If the error cannot be
corrected, contact your service
representative.
Contact your service representative.
Contact your service representative.
Restore the jumper setting after
powering off the server.
Disable initialization of the optional
device expansion ROM by using the
BIOS SETUP utility (see Chapter 4).
Contact your service representative.