NEC Express5800 User Manual page 88

4-28 Configuring Your Server
1.
When BIOS detects a bootable device, it displays the information on the device in the
relevant indication.
To boot the server from a desired device, the device must be registered as a boot device.
(Up to eight boot devices can be registered.)
2.
Pressing X after selecting a device allows the selected device to be registered as a boot
device or deleted from the registration.
With eight boot devices being registered, any other device cannot be registered as a boot
device even if you press X. To register a device as a boot device newly, first delete the
registration of a device registered as a boot device but not booted any more.
3.
You can change the boot priority (first to eighth) of each device by using ↑, ↓, + and/or –.
To change the priority of a device, move the cursor to the device by using the ↑ or ↓, and
press + or –.
IMPORTANT:
To boot NEC EXPRESSBUILDER, set the priority of the devices as
shown in the figure above.
If you added a new device or changed device configuration, you
need to confirm the boot priority on Boot menu in the following
procedures.
Select [Boot] - [Boot Priority order] and change the boot order
exactly same as the Boot menu shown on the previous page. Then,
select [Exit] - [Exit Saving Changes], and restart the server.