NEC Express5800 User Manual page 180

5-64 Installing the Operating System with Express Setup
Procedure for Modifying the Drive Letter
Be careful that the drive letter of the system or boot volume cannot be modified with the following
procedure.
<Windows Server 2008>
1.
Click Start menu, right-click [Computer], and specify [Manage] to start [Server Manager].
2.
Specify the [Storage] - [Disk Management] in the left side of the window.
3.
Right-click the volume you want to modify the drive letter and specify the [Change Drive
Letter and Paths...].
4.
Click [Change...].
5.
Choose the [Assign the following drive letter] and specify the drive letter you want to
assign.
6.
Click [OK].
7.
If the following message appears, click [Yes].
Some programs that rely on drive letters might not run correctly.
Do you want to continue?
8.
Close the [Server Manager].
<Windows Server 2003>
1.
Click Start menu, right-click [My Computer], and specify [Manage] to start [Computer
Management].
2.
Specify the [Disk Management] in the left side of the window.
3.
Right-click the volume you want to modify the drive letter and specify the [Change Drive
Letter and Paths...].
4.
Click [Change...].
5.
Choose the [Assign the following drive letter] and specify the drive letter you want to
assign.
6.
Click [OK].
7.
If the following message appears, click [Yes].
Changing the drive letter of a volume might cause programs to no longer run.
Are you sure you want to change this drive letter?
8.
Close the [Computer Management].