NEC Express5800 User Manual page 81

See the table below for the items.
Option
Supervisor
Password Is
User Password Is
Set Supervisor
Password
Set User
Password
Password on boot*
Fixed disk boot
sector
Diskette access*
* You can set this item when the password has been set.
Parameter
Clear
Set
Clear
Set
Up to eight
alphanumerics
Up to eight
alphanumerics
[Disabled]
Enabled
[Normal]
Write Protect
User
[Supervisor]
Description
Indicates the password setting status.
Indicates the password setting status.
Press Enter to display the supervisor
password input screen. This password
enables all the SETUP menus to be
accessed. This setting can be done
only on login with the password input
of "Supervisor" at start of SETUP.
Press Enter to display the user
password input screen. For this
password, accessing to the SETUP
menu is restricted.
Specify whether the passwords are
entered or not on booting. At first the
supervisor password must be set. If
the supervisor password is set and
this option is disabled, BIOS
determines that a user is booting.
Specify whether to permit writing into
boot sector of the hard disk drive or
not.
Set an authority to access the floppy
disk in floppy disk drive.
Configuring Your Server 4-21
Your Setting
[ ]: Factory-set