Peripheral Configuration - NEC Express5800 User Manual

Peripheral Configuration

The screen shown below appears if you select "Peripheral Configuration" on the Advanced menu.
See the table below for the items.
IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port A
Base I/O Address
Serial Port B
Base I/O Address
Parallel Port
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port A is
enabled or disabled.
[Enabled]
[3F8/IRQ4] Selects the base I/O address for serial
port A.
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled Selects whether serial port B is
enabled or disabled.
[Enabled]
Set to [Enabled] if optional RS-232C
Connector Kit is additionally installed.
3F8/IRQ4 Selects the base I/O address for serial
port B.
[2F8/IRQ3]
3E8/IRQ4
2E8/IRQ3
Disabled Selects whether the parallel port is
enabled or disabled.
[Enabled]
Configuring Your Server 4-17
Your Setting