NEC Express5800 User Manual page 346

D-22 Installing Windows Server 2008
12.
You will be asked, "Where do you want to install Windows?".
Select [Load Driver], and then click [Browse].
The folder reference dialog box appears. Select a path to the folder in the NEC
EXPRESSBUILDER DVD, and then click [OK].
– Windows Server 2008 64-bit (x64) Edition :
<drive letter>:\011\win\winnt\oemfd\ws2008x64\fd1\megasas
– Windows Server 2008 32-bit (x86) Edition :
<drive letter>:\011\win\winnt\oemfd\ws2008\fd1\megasas
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to step 13.
[LSI Logic MegaRAID SAS 8708EM2 RAID Controller]
13.
Remove the EXPRESSBUILDER and set Backup DVD-ROM or Windows Server 2008
DVD-ROM.
14.
Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT:
step 17.
15.
Click [New], enter a partition size, and then click [Apply].
16.
Select the partition created in step 15, and then click [Format].
If the partition has already been created, go to