Lsi Software Raid Configuration Utility And Universal Raid Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
4.7
LSI Software RAID Configuration Utility and Universal RAID
Utility
Note the following when you use Universal RAID Utility together with LSI Software RAID Configuration Utility.
(1)
Terms
LSI Software RAID Configuration Utility and Universal RAID Utility differ in terms. If you use Universal RAID
Utility together with LSI Software RAID Configuration Utility, read the terms according to the following list.
Terms of LSI Software RAID Configuration
Adapter
Virtual Drive
Array
Physical Drive
Drive Group
(2)
Number and ID
The number to manage each component of RAID Controller of Universal RAID Utility is different to LSI Software
RAID Configuration Utility. See the table below.
Refer to Universal RAID Utility User's Guide for more information.
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical Drive (Physical Device)
Drive Group (Disk Array)
126
Utility
raidcmd is a command that Universal RAID Utility provides. Refer to Universal RAID Utility
Tips
User's Guide for more information.
Item
Express5800/B120f-h Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Physical Device
Disk Array
Management number
LSI Software RAID
Configuration Utility
Number starting from 0
Number starting from 0
Number starting from 0
Number starting from 0
Number starting from 0
4. RAID System Configuration
raidcmd
RAID Controller
Logical Drive
Disk Array
Physical Device
Disk Array
Universal RAID Utility
Number starting from 1
Number starting from 1
Number starting from 1
Assigned based on Enclosure
number and slot number
Number starting from 1