NEC Express5800 User Manual page 351

5. Change the password, and then click the
NOTE:
uppercase letters, lowercase letters, and numbers.
6. When the following message appears, click [OK].
7. At the command prompt, enter user information.
NOTE:
Server 2008 Step-By-Step Guide".
After installations is completed, be sure to execute the tasks described in "Setup of Device Driver
(Normally Install in Server)" and "Updating the System" of this chapter.
The Windows Server 2008 password must combine
For more detailed procedure, see the "Microsoft Windows
Installing Windows Server 2008 D-27
button.