Setting Wol - NEC Express5800 User Manual

Setting WOL

Refer to the following procedure to enable WOL.
When PROSet is not installed
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) 82566DM-2 Gigabit Network
Connection] to open the adapter [Properties].
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Allow the computer to turn off this device to save power"
"Allow this device to bring the computer out of standby"
4.
Click [Advanced] tab and point to [Enable PME].
5.
Set the "Enable" in [Value].
6.
Click [OK].
7.
Reboot the system.
Installing Windows Server 2003 x64 Editions E-25
Change setting
ON
ON