NEC Express5800 User Manual page 73

Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced".
If you select a menu item preceded by symbol
See the table below for the items.
Option
Boot-time
Diagnostic Screen
Reset
Configuration Data
NumLock
Memory/Processor
Error
Parameter Description
[Disabled] Specify whether the power-on self-test
(POST) running screen is displayed or not
Enabled
on booting. If disabled, the BIOS will display
the NEC logo during POST. Press Esc to
switch to the POST running screen.
[No] Select "Yes" if you want to clear the system
configuration data stored in POST. This
Yes
parameter is automatically reset to "No" at
the next boot.
[On] Specify whether to enable or disable the
Numlock feature at system start-up.
Off
[Boot] Specify whether to stop POST execution if a
memory or processor error was detected
Halt
during POST.
Configuring Your Server 4-13
and press Enter, the appropriate submenu appears.
Your Setting
[ ]: Factory-set