Lsi Software Raid Configuration Utility And Universal Raid Utility - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
5.4

LSI Software RAID Configuration Utility and Universal RAID Utility

The points to be noted when using the Universal RAID Utility together with the LSI Software RAID Configuration
Utility are described below.
(1) Terms
Some terms are different between the LSI Software RAID Configuration Utility and Universal RAID Utility. When
using the Universal RAID Utility together with the LSI Software RAID Configuration Utility, replace the terms as
shown in the table below:
Terms of LSI Software RAID Configuration Utility
Adapter
Virtual disk
Array
Physical drive
(2) Numbering
The numbers indicating RAID controller information differ between the LSI Software RAID Configuration Utility
and Universal RAID Utility as shown in the table below.
For details about the differences, see "Universal RAID Utility User's Guide".
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical drive (Physical Device)
Tips
raidcmd is a command provided by the Universal RAID Utility. For details, see
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller RAID Controller
Logical Drive Logical Drive
Disk Array Disk Array
Physical Device Physical Device
Management Number
LSI Software RAID Universal RAID Utility
Configuration Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based on
an enclosure that contains
the physical device and its
slot number.
5. RAID System Configuration
raidcmd
115